All Products
-
Petroleum Testing Instruments
-
Lubricating Oil And Grease Antifreeze Testing Instruments
-
Diesel Fuel Testing Equipment
-
Transformer Oil Testing Equipment
-
Feed Testing Instrument
-
Pharmaceutical Testing Instruments
-
Edible Oil Testing Equipment
-
Chemical Analysis Instruments
-
Lube Oil Testing Equipment
-
Flour Test Instrument
-
Food Testing Instruments
-
Crude Oil Testing Equipment
-
Hydraulic Oil Testing Equipment
-
Flash Point Tester
-
Kinematic Viscosity Tester
-
Freezing Point Tester
-
Cone Penetration Apparatus
Phone Number :
+8615665870097
WhatsApp :
+8613805402265
Principle of Titration Neutralization Method SH108 Oil Acid Number Tester Essential for oil refineries
| MODEL: | SH108 |
|---|---|
| Power Supply: | 220V±10%,50Hz±1% |
| Ambient Temperature: | 10 ℃ ~ +30℃ |
Essence and fragrances Determination of flash point SH105E automatic Binsky Martin closed flash point tester
| MODEL: | SH105E |
|---|---|
| Working Power Supply: | AC220V ± 10%, 50Hz |
| Method Of Use: | Binsky Martin Closed Cup Method |
SH105D balance method low-temperature closed flash point tester for closed flash point detection of paints and paints
| MODEL: | SH105D |
|---|---|
| Power Supply: | AC 220V±10%, 50 Hz |
| Flash Point Measurement Range: | -30~100°C |
Automatic calculation results of SH101C automatic mechanical impurity content analyzer (with balance)
| MODEL: | SH101C |
|---|---|
| Temperature: | 4-way PID Temperature Control |
| Temperature Control Range: | Room Temperature~100 ℃ |
Mechanical impurity content detection of lubricating oils and additives SH101 gravimetric method
| MODEL: | SH101 |
|---|---|
| Power: | AC220V±10% 50Hz |
| Temperature Control Accuracy: | ≤± 1 ℃. |
ASTM D1120 Engine coolant boiling point tester Heating mantle heating tap water circulating cooling
| MODEL: | SH0089 |
|---|---|
| Applicable Standards: | ASTM D1120, SH/T0089 Or SH/T0430 |
| Heating Mode: | Electric Heating-jacket |
ASTM D 1384 Engine Coolant Corrosion Tester With 3 Holes Electric heating plate with built-in silent air compressor
| MODEL: | SH0085B |
|---|---|
| Temperature Control Range: | Room Temperature+100 ℃ ± 0.1 ℃ |
| Air Flow Meter: Flow Range: | 30~300ml/min |
ASTMD1384 Engine coolant corrosion tester with water bath heating and built-in silent air compressor with three holes
| MODEL: | SH0085 |
|---|---|
| Power: | AC220V±10% 50Hz |
| The Power Consumption Of The Whole Machine: | Not More Than 2000W |
ASTM D3241Four hole temperature control accuracy of jet fuel silver strip corrosion tester: ± 0.5 ℃
| MODEL: | SH0023 |
|---|---|
| Power Supply: | AC(220±10%)V, 50 Hz |
| Work Rate: | 1500W |
Lubricating grease (Vaseline) cone penetration test SH017 full-automatic constant temperature cone penetration tester
| MODEL: | SH017 |
|---|---|
| Measurement Range: | 0-680 Cone Penetration |
| Resolution: | 0.01 Mm |